Posts for: August, 2020
Losing your teeth can be a traumatic experience with serious consequences for your overall health. Fortunately, you have great options for replacing lost teeth that can restore both appearance and dental function.
One such option is a fixed bridge supported by dental implants. While implants are best known for single tooth replacement, they can also be used with other restorations like bridges. In this case, the bridge is screwed into a few well-placed implants to support it.
Implants can provide bridges with more security and support, and without the need to alter adjacent teeth that are commonly used for traditional tooth replacement. They may also slow or stop bone loss because the titanium in implants naturally attracts bone cells that grow and adhere to its surface and provide stimulation to the bone cells during function.
Because of these benefits an implant-supported bridge could be a life-changer that provides years of satisfaction. But we can’t simply “set them and forget them”: They require dedicated oral hygiene just like natural teeth.
While the bridge materials and implants themselves are in no danger from disease, the same can’t be said for the implant’s supporting gums and bone. Dental plaque, the main driver in gum disease, can place these tissues at risk for infection that could eventually lead to implant failure.
It’s important, then, for you to floss around your new implants to remove any plaque. This differs from regular flossing in which you work the thread between teeth. Instead, you’ll have to maneuver the floss between the bridge and gums with the help of a floss threader, a small slender tool with a loop at one end and a stiffer plastic edge at the other (similar to a sewing needle).
To use it, first run 18” of floss through the loop until you get equal lengths and then work the tail of the floss threader between the bridge and gums while holding one end of the floss. Once through, you pull the floss threader through so that the floss is on either side of the bridge. Then grab each end of the floss and pull it snug to floss up and down one side of the implant. Go to the next side and repeat this procedure for all the implants.
As an alternative, you could use an oral irrigator, which emits a pulsating spray of water to loosen and wash away plaque. Either way, though, it’s important to floss around implants to get the most life out of your bridge.
If you would like more information on proper care for implant-supported restorations, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Oral Hygiene for Fixed Bridgework.”
When you floss (you do floss, right?), you probably notice a sticky, yellowish substance called plaque stuck to the thread. This thin film of tiny food particles and bacteria is the reason you floss and brush in the first place: Because it's the main trigger for tooth decay and gum disease, removing it decreases your risk for disease.
But this isn't the only form of plaque you should be concerned about. That same sticky substance can also interact with your saliva and harden into what's commonly known as tartar. Dentists, however, have a different term: They refer to these calcified deposits as calculus. And it's just as much a source of disease as its softer counterpart.
You might have noticed that this form of plaque has the same name as an advanced type of mathematics. Although dental calculus has little in common with algebra's cousin, both terms trace their origins back to the same linguistic source. The word “calculus” in Latin means “small stone;” it became associated with math because stone pebbles were once used by merchants long ago to calculate sales and trades.
The term became associated with the substance on your teeth because the hardened plaque deposits resemble tiny stones or minerals—and they can be “as hard as a rock” to remove. In fact, because they adhere so firmly it's virtually impossible to remove calculus deposits with brushing or flossing alone. To effectively eliminate calculus from tooth surfaces (including under the gum line) requires the skills and special dental tools of dentists or dental hygienists.
That's why we recommend a minimum of two dental cleanings a year to remove any calculus buildup, as well as any pre-calcified plaque you might have missed with daily hygiene. Reducing both plaque and calculus on your teeth fully minimizes your risk of dental disease. What's more, removing the yellowish substance may also brighten your smile.
That's not to say daily brushing and flossing aren't important. By removing the bulk of plaque buildup, you reduce the amount that eventually becomes calculus. In other words, it takes both a daily oral hygiene practice and regular dental visits to keep your teeth healthy and beautiful.
Chipped a tooth? Don't beat yourself up—this type of dental injury is quite common. In fact, you probably have a favorite celebrity who has chipped one or more of their teeth. The list is fairly long.
Some chipped a tooth away from the limelight, such as Tom Cruise (a hockey puck to the face as a teen), Jim Carrey (roughhousing on the playground) and Paul McCartney (a sudden stop with a moped). Others, though, chipped a tooth while “on the job.” Taylor Swift, Hillary Duff and Jennifer Lopez have all chipped a tooth on stage with a microphone. And chipped teeth seem to be an occupational hazard among professional athletes like former NFL star, Jerry Rice.
Since smiles are an indispensable asset to high-profile celebrities, you can be sure these stars have had those chipped teeth restored. The good news is the same procedures they've undergone are readily available for anyone. The two most common restorations for chipped teeth are dental bonding and veneers.
The least invasive way to fix a chipped tooth is bonding with a material known as composite resin. With this technique, resin is first mixed to match the tooth color and then applied to the chipped area or applied in layers of color to get just the right look. After a bit of shaping, curing and adjustment, we're done—you can walk out with a restored tooth in one visit.
Bonding works well with slight to moderate chips, but it could be less durable when there is more extensive damage. For that, you may want to consider porcelain veneers. Veneers are thin wafers of dental porcelain that are bonded to the front of teeth to mask blemishes like stains, slight gaps or, yes, chips. Veneers can be so lifelike that you won't be able to tell the veneered tooth from your other teeth. They are fashioned to match the color and shape of an individual's teeth. Because of the time and design detail involved, veneers are more expensive than bonding, yet still within an affordable range for many.
Teeth require some alteration before applying traditional veneers because otherwise the teeth can appear bulky when the veneer is bonded to the existing tooth. To compensate, we remove a little of the tooth enamel. Because this loss is permanent, you'll need to wear veneers or have some other form of restoration for the tooth from then on. For many people, though, that's a small price to pay for a smile without chips.
Your first step to repairing a chipped tooth is to come in for an examination. From there, we'll recommend the best option for your situation. And regardless of which, bonding or veneers, we can change your smile for the better.
If you would like more information about restoring injured teeth, please contact us or schedule a consultation. To learn more, read the Dear Doctor magazine articles “Teeth Whitening” and “Porcelain Veneers: Strength and Beauty as Never Before.”